BDBVC - LAGGING ADHESIVE/COATING,713 NG

  • MSDS: BDBVC
  • Manufacturer: VIMASCO CORP
  • Product Name: LAGGING ADHESIVE/COATING,713 NG
  • National Stock Number: 8040-00-142-9359
Product Identification

Product ID:LAGGING ADHESIVE/COATING,713 NG
MSDS Date:01/01/1987
FSC:8040
NIIN:00-142-9359
MSDS Number: BDBVC

Responsible Party
VIMASCO CORP

Emergency Phone: 304-755-3328

Cage: 14947

Contractor
VIMASCO CORP
516 NITRO, WV 25143 US

Telephone: 304-755-3328

Cage: 14947

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <2%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PHENOL ISOPROPYLATED PHOSPHATE(3-1) CAS# 68937-41-7

Fraction By Weight: <5%


VINYL ACETATE (SARA III)

CAS: 108-05-4

RTECS: AK0875000

Fraction By Weight: 0.2%

OSHA PEL 10 PPM/15 STEL

ACGIH TLV: 10 PPM/15,A3 STEL;93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HEXYLENE GLYCOL

CAS: 107-41-5

RTECS: SA0810000

Fraction By Weight: <4%

OSHA PEL C 25 PPM

ACGIH TLV: C 25 PPM; 9192

Hazards

Effects of Overexposure:SKIN,EYE:IRRIT.INHAL:NASAL,RESP IRRIT,NEURO
DISTURB INGEST:NEURO DISTURB,DRUNK,KIDNEY INJURY,NARCOS.

First Aid

First Aid:SKIN:WASH W/ SOAP & WATER.EYES:FLUSH W/ WATER 15 MIN.IF IRRIT
PERSISTS,CALL MD.INHAL:REMOVE TO FRESH AIR.GIVE O*2 IF
NEC.INGEST:GIVE 2 GLASSES OF WATER,INDUCE VOMITING,CALL MD OR
POISON CONTROL.

Fire Fighting

Flash Point:>212F,>100C TCC
Lower Limits:W/K
Extinguishing Media:FOAM,ALCOHOL FOAM,CO*2,DRY CHEMICAL,WATER FOG
Fire Fighting Procedures:USE SCBA,FULL PROTECTIVE EQUIPMENT
Unusual Fire/Explosion Hazard:PROD INFLAM UNTIL WATER HAS BOILED OR
EVAP .FOR DRIED FILM OR RESIDUAL SOLID USE PROTECT EQUIP,SCBA.

Accidental Release

Spill Release Procedures:MAJOR SPILL SHOULD BE COLLECTED FOR
DISPOSAL.MINOR SPILLS MAY BE FLUSHED TO SEWER IF REGS PERMIT.BEFORE
DRYING,PRODUCT MAY BE WASHED AWAY W/WATER.AFTER DRYING,REMOVE W/
PAINT SCRAPER OR STRONG SOLVENT .

Handling

Handling and Storage Precautions:AVOID BREATHING VAP.KEEP CONT
CLOSED.USE ADEQUATE VENT.STORE INDOORS AT 45F-90F.AVOID APPLICATION
TO HOT SURFACES AS VAP MAY BE IRRIT.
Other Precautions:AVOID INHAL OF AIRBORNE PARTICLES.DO NOT REUSE
CONTAINERS FOR PORTABLES OR EDIBLES.THOROUGHLY CLEAN HANDS AFTER
USE.WASH CONTAM CLOTHES BEFORE REUSE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPR CHEMICAL VAPOR RESP IN
RESTRICTED AREAS
Ventilation:GENERAL(MECHANICAL)
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES,FACE SHIELD
Other Protective Equipment:EYEBATH
Supplemental Safety and Health
MSDS PREP:86094.SPEC DATA:CLASS 1.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Density:<1
Spec Gravity:1.30
Evaporation Rate & Reference:<1(ETHER)
Solubility in Water:APPRECIABLE
Appearance and Odor:VISCOUS PASTE,WHITE,MILD LATEX ODOR
Percent Volatiles by Volume:60.0

Stability

Stability Indicator/Materials to Avoid:YES
WATER INCOMPATIBLE MATERIALS
Hazardous Decomposition Products:CO,CO*2,HPO*X,TRACE AMTS OF
NH*3,FORMALDEHYDE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/ FEDERAL,STATE &
LOCAL REGULATIONS EMPTY CONT ARE NONHAZ UNDER RCRA AS INDUSTRIAL
WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.